Taking the Overhead Wires Through a Tunnel

A challenge that was always there from the start and which had been exercising my mind from the day I started planning this model railway was how I was going to cope with taking an overhead-electrified model railway line through tunnels. The overhead on this layout is realistic in appearance but is non-functional, the trains picking up their current through the normal two-rail system just as models of diesel or steam trains would do, but it is just as important that the pantographs keep contact with the wire or else they would cause major problems, possibly including damage, if they are dewired and snag the catenary.

The solution I adopted, and which I have since heard has been done by others, was to glue a length of rail to the roof of the tunnel, soldering the contact wire carefully at each end to make a smooth transition. A pantograph then glides from wire to rail as it enters the tunnel and back to wire when leaving the tunnel, but to the observer the wire simply seems to enter the tunnel as it would in real life. Because of the presence of overhead lines it is impossible for a viewer to get their eyes low enough to look into the tunnel and see that I have thus cheated! See it done on the latest video:

Taking the OHLE through the first tunnel

The next project will be to take the wire to the next tunnel mouth which will be the entrance to the hidden sidings where I shall have to make arrangements for the overhead to end in such a way that raised pantographs are wired as they leave the hidden area for the visible part of the layout. Once that is done I can begin the gradients and spirals, with more complex tunnels, which will take the other track up and over the mountains to the terminus to be constructed above the hidden sidings. In many ways the short section of track on this first line has been the test-bed for the complex sections to come, but in any case it had to be built first because the rest will be built over it!

Published by Mark Warrick

amateur photographer | railway modeller | rail travel blogger

2 thoughts on “Taking the Overhead Wires Through a Tunnel

  1. Fascinating to watch the pantograph bobbing up and down. Hadn’t thought about the increased sound in the tunnel.
    Wonder what happens in the hidden sidings. Does the catenary continue there too or is there a joining section where the pantograph first meets the catenary wire?

    Like

    1. All will be revealed in the next post, Chris! The work is already done: just the video to compose … but yes, no overhead wiring in the fiddle yard because I need to be able to remove and replace vehicles.

      Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: